HP XP P9500 Storage - Manual (Page 81)

QUERY example
Output descriptions
The following table shows the field descriptions of the output resulting when CQUERY TSO and
QUERY ICKDSF
commands are run.
Table 21 Field descriptions for CQUERY TSO and the QUERY ICKDSF command output
Description Field
Device number of the volume on which the CQUERY command is issued. DEVICE
PRIMARY indicates that the volume is a P-VOL. SECONDARY indicates that the volume
is a T-VOL. LEVEL
Pair status STATE
Invalid for BC; Active is shown. PATH STATUS
Invalid for BC; NO is shown. CRIT
Invalid for BC; NO is shown. CGRPLB
SSID of the P-VOL CU PRIMARY-SSID
P-VOL LDEV number PRIMARY-CCA
P-VOL CU number PRIMARY-LSS
P-VOL serial number PRIMARY-SERIAL
SSID of the S-VOL CU SECONDARY-SSID
S-VOL LDEV number SECONDARY-CCA
S-VOL CU number SECONDARY-LSS
S-VOL serial number. Running the CQUERY TSO command for the S-VOL also show
following information: SECONDARY-SERIAL
00ab000nnnnn
where a indicates that the pair is defined as a consistency group and b indicates the
pair was split using At-Time Split. 0 indicates otherwise. nnnnn is the S-VOL serial number.
Showing pair information with CQUERY TSO, QUERY ICKDSF 81