HP XP P9500 Storage - Manual (Page 40)

speed and better performance with Slower, faster speed but more impact to performance with
Faster.
9. Click Next.
10. In the Select Primary Volumes window, in the Available LDEVs table, select an LDEV to be a
P-VOL, then click Add. The LDEV is moved to the Selected LDEVs table. You can make multiple
selections.
11. Click Next.
12. In the Select Secondary Volumes window, assign LDEVs as S-VOL to the P-VOL LDEV (or LDEVs)
selected in the Select Primary Volumes window.
Complete the following:
•
If you specified a P-VOL, select a secondary LDEV ID in the Available LDEVs table, and
click Set. Repeat this step to assign additional S-VOLs.
•
If you specified more than one P-VOL, select an LDEV ID in the Available LDEVs table,
then select a P-VOL LDEV ID in the Selected Pairs table, and click Set.
Repeat this step as many times as needed to make all your pairings.
By not selecting a P-VOL in the Selected Pairs table, the S-VOL you select and set is
assigned to P-VOLs in order from the first line of the table.
40 Performing pair operations