HP XP P9500 Storage - Manual (Page 80)

CQUERY example
If the command is issued to the S-VOL in a consistency group, output for the SECONDARY serial
number is shown in the following format:
00|S|@|000|30158
where:
•
S indicates that it belongs to a consistency group.
•
@ indicates the consistency group split operation.
•
30158 is the serial number.
PPRCOPY QUERY
The following table shows the PPRCOPY QUERY command parameters used to show pair
information.
Table 20 PPRCOPY QUERY parameters
Description Value Parameters
Only one of the three parameters should be
specified. The italic term is the arbitrary name. DDNAME = dname = JCL statement identifying
the volume. DDNAME,
SYSNAME, or
UNITADDRESS
For example, dname is the arbitrary unique
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
name of the JCL statement which identifies the
volume.
UNITADDRESS = ccuu = device number.
80 Pair operations using PPRC