HP XP P9500 Storage - Manual (Page 54)

4. The Description column shows the operation that was run.
The following table shows a list of the codes.
Explanation Description Code
Initial copy began. DUPLEX START 4710
Initial copy completed and pair status changed to SIMPLEX. DUPLEX END 4720
Pair split operation began. Split/SUSPOP START 4730
Pair split completed and pair status changed to
Split/SUSPOP. Split/SUSPOP END 4740
Pair resync operation began. SP-Pend/TRANS START 4750
Resync-R/REVRSY START
Pair resync operation completed and pair status changed
to DUPLEX. SP-Pend/TRANS END
Resync-R/REVRSY END
4760
The pair was deleted and status changed to SIMPLEX. Deleting/TRANS DELETE 4780
The pair was suspended and pair status has changed to
Suspend/SUSPER. Suspend/SUSPER SUSPEND 4790
The copy has terminated abnormally for reasons other than
above. COPY ABNORMAL END 47D0
Initialization processing has begun. INITIALIZE START 47E9
Initialization processing has terminated normally. INITIALIZE END 47EA
Initialization processing has terminated abnormally. INITIALIZE ENDED ABNORMAL 47EB
Related information
•
“View Histories window” (page 97)
Maintaining the system
Some maintenance tasks are a response to behavior discovered during system monitoring. Other
tasks are done to keep the system in tune with your changing requirements.
54 Monitoring and maintaining the system