HP XP P9500 Storage - Manual (Page 132)

3. In the tree, in the Pair Operations window, select the CU image where the pairs or volumes
are located.
Related volumes are shown in the volume list. If a volume is already paired, pair information
is also shown.
4. Select the pairs that you want to suspend (or the volumes whose pairs you want to suspend),
right-click the selected pairs to show the menu, and select the Suspend Pair command to open
the Suspend Volume Pair dialog box.
5. On the Suspend Volume Pair dialog box, select the pairs you want to suspend, and click OK
to reflect the settings to the Preview List on the Pair Operation window.
To remove pairs from the list, complete the following:
1. Select the unneeded pairs.
2. Right-click while selecting the pairs.
3. From the menu, select the Delete command.
6. Repeat steps 4 and 5 to suspend additional pairs in the Pair Operation window.
7. In the Pair Operation window, click Apply to suspend the specified pairs.
The Pair Operation window shows the results of the Suspend Volume Pair operations, that is,
the pair status changed to Suspend/SUSPER.
132 Pair operations (secondary window)