HP XP Performance Advisor Software - Manual (Page 51)

Host configuration script (HOSTCFG)
This CLUI script requests array information from a Host Agent, removes unwanted hosts, or unrequests
array information.
HOSTCFG usage
Following is the general format of the command to invoke the script:
hostcfg –op -ha [-auth ] [-ms ]
[-L] [d] [-hr] [-?]
Following are the arguments for this command:
Required arguments:
–op
The operation to be performed. Not necessary if -list
is used. Must be followed by one of the following:
xpinfo_req: indicates that must send the XPINFO data to the Management station.
xpinfo_unreq: indicates that the Management
Station no longer needs the XPINFO data.
ha_rem: requests the management station to remove this Host
Agent from its database.
–ha The location of the Host Agent. This can either be a host name or an IP address. Not
necessary if -list is used.
Optional arguments:
–list Lists the host configuration data that is stored on the management station.
–L The output from the -list switch must be labeled, but delimited.
–d The character used to delimit output.
–hr Output from the -list switch must be in human-readable form.
–auth Authentication. Must be followed by a username and password pair in the form
user:passwd.
–ms
Management station. Must be followed by the URL of the management station.
–? Prints the usage statement.
HOSTCFG sample output
The following are output data samples for the CLUI shell script described in the previous section:
hostcfg -list hr
Host Name OS Status Last Update
hpbs1428.user.server.com hp-ux RECEIVED 14:04:41 01.31.2002
hostcfg -list -L
Host Name,OS,Status,Last Update
hpbs1428.user.server.com,hp-ux,RECIEVED,140441 01312002
hostcfg -list
hpbs1428.user.server.com,hp-ux,RECIEVED,140441 01312002
HP StorageWorks Performance Advisor XP Software command-line user interface user guide 51