Logical device history script (ldev), Ldev usage, Ldev sample output – HP XP Performance Advisor Software User Manual
Page 37

Logical device history script (LDEV)
The report CLUI application provides a command that displays Logical Device History data.
The required elements for this command are –dkc, and –ldev. Optionally, you can specify a
management station by using –ms
Following is the general format of the command to invoke the script:
LDEV usage
ldev [-d #> -ldev [-?] –d An optional parameter used to specify delimited output data. There is no space between d and the delimiter. –L An optional parameter used to specify labeled and delimited output data. –hr An optional parameter used to request the data in a human-readable format. The array serial number. –ms The address of a management station in the form –auth A username and password pair in the form username:password. –dver Indicates how the data must be displayed. XXXXXX is a version number. Currently supported values are 010500 and 010600. The default value is 010500. The logical device number in the form The start time in the form mm.dd.yyyy hh:mm:ss. The end time in the form mm.dd.yyyy hh:mm:ss. –? Prints the usage statement. If no start time and end time are specified, this command returns the most recent 10 records from the management station. LDEV sample output The following are output data samples for the CLUI shell script described in the previous section: NOTE: The LDEV command does not report "Write Cache Hits" for either Random or Sequential workloads. The Write Cache Hits for Random and Sequential workloads is displayed for mainframe volumes only. HP StorageWorks Performance Advisor XP Software command-line user interface user guide 37
where:
Labels in labeled outputs (specified by –hr or –L in the command line) are in bold.