HP XP Performance Advisor Software - Manual (Page 19)

Disk Controller snapshot script (DKCS)
The report CLUI application provides a script that displays Disk Controller Snapshot data. The —dkc
switch is a required element. Optionally, you can specify a management station by using ms ,
and specify a username and password pair by using auth .
DKCS usage
Following is the general format of the command to invoke the script:
dkcs [-d] [-L] [-hr] [-ms ] [-auth ] -dkc
#> [-?]
where:
–d An optional parameter used to specify delimited output data. There is no space between d
and the delimiter character.
–L An optional parameter used to specify labeled and delimited output data.
–hr An optional parameter used to request the data in a human-readable format.
–ms The address of a management station in the form http://path.to.managementstation/ .
–auth A username and password pair in the form username:password.
The array serial number.
–? Prints the usage statement.
DKCS sample output
The following are the output data samples for the CLUI shell script described in the previous section:
NOTE:
Labels in labeled outputs (specified by –hr or –L in the command line) are in bold.
dkcs -hr -dkc 30143
Array Type: XP512
Serial #: 30143
Record Time: 13:55:00
Record Date: 07/18/2001
Micro Code: 01.12.16
Raid Manager Lib: 01.03.02
Chip Data: ACP Data:
P = 100% 97% 94% 91% L = 0% 3% 6% 9%
Q = 88% 85% 82% 79% K = 12% 15% 18% 21
R = 76% 73% 70% 67% J = 24% 27% 30% 33%
S = 64% 61% 58% 55% H = 36% 39% 42% 45%
V = 52% 49% 46% 43% E = 48% 51% 54% 57%
W = 40% 37% 34% 31% D = 60% 63% 66% 69%
X = 28% 25% 22% 19% C = 72% 75% 78% 81%
Y = 16% 13% 10% 7% B = 84% 87% 90% 93%
Data Bus = 27% Cache Usage = 300MB
Control Bus = 37% Cache Size = 4096MB
Cache Pending = 50MB
Cache Side File = 200MB
HP StorageWorks Performance Advisor XP Software command-line user interface user guide 19