HP XP Performance Advisor Software - Manual (Page 45)

Port performance data script (PORT)
The CLUI provides a command that displays port performance data. The required elements for this
command are –dkc and –port. Optionally, you can specify a management station by using –ms
, and specify a username and password pair by using –auth .
PORT usage
Following is the general format of the command to invoke the script:
ldev [-d] [-L] [-hr] [-ms ] [-auth ] -dkc
#> -port [-?]
where:
–d An optional parameter used to specify delimited output data. There is no space between
d and the delimiter.
–L An optional parameter used to specify labeled and delimited output data.
–hr An optional parameter used to request the data in a human-readable format.
The array serial number.
–ms The address of a management station in the form http://path.to.managementstation/ .
–auth A username and password pair in the form username:password.
The port number in the form CLxc, where x is the cluster number and c is the port letter within
the cluster.
–? Prints the usage statement.
PORT sample output
The following are output data samples for the CLUI shell script described in the previous section:
HP StorageWorks Performance Advisor XP Software command-line user interface user guide 45