HP XP Performance Advisor Software - Manual (Page 42)

–metric Constrains the output by the metric category. Valid values are as follows:
IO_TOTAL - LDEV IO Total
IO_RAND_TOTAL LDEV – IO Random Total
IO_RAND_READ LDEV - IO Random Read
IO_RAND_READ_CACHE LDEV – IO Random Read Cache Hits
IO_RAND_WRITE LDEV – IO Random Write
IO_RAND_WRITE_CACHE
LDEV IO Random Write Cache Hits
IO_SEQ_TOTAL LDEV IO Sequential Total
IO_SEQ_READ LDEV IO Sequential Read
IO_SEQ_READ_CACHE LDEV IO Sequential Read Cache Hits
IO_SEQ_WRITE LDEV IO Sequential Write
IO_SEQ_WRITE_CACHE LDEV
IO Sequential Write Cache Hits
MB_TOTAL LDEV MB Total
MB_RAND_TOTAL LDEV MB Random Total
MB_RAND_READ LDEV MB Random Read
MB_RAND_WRITE LDEV MB Random Write
MB_SEQ_TOTAL LDEV MB Sequential Total
MB_SEQ_READ LDEV MB Sequential Read
MB_SEQ_WRITE LDEV MB Sequential Write
CFW_TOTAL LDEV IO type
CFW_READ LDEV IO type
CFW_READ_CACHE LDEV IO type
CFW_WRITE LDEV IO type
CFW_WRITE_CACHE LDEV IO type
DFW_COUNT LDEV IO type
DFW_NRML_COUNT LDEV IO type
DFW_SEQ_ACCESS LDEV IO type
DFW_WRITE_HITS LDEV IO type
DFW_SA_WRITE_HITS LDEV IO type
CACHEMODE_INHIBIT LDEV IO type
CACHEMODE_BYPASS LDEV IO type
PORT_IO_MAX Port Maximum IO/s
PORT_IO_MIN Port Minimum IO/s
PORT_IO_AVE Port Average IO/s
PORT_MB_MAX Port Maximum MB/s
PORT_MB_MIN Port Minimum MB/s
PORT_MB_AVE Port Average MB/s
FBUS_HI DKC Bus Utilization
FBUS_LO DKC Bus Utilization
MBUS_HI DKC Bus Utilization
MBUS_LO DKC Bus Utilization
BACKEND_SEQ_READ LDEV Backend
BACKEND_NONSEQ_READ LDEV Backend
BACKEND_WRITE LDEV Backend
THP Pool Occupancy
Snapshot Pool Occupancy
–mval Constrains the output by the item value, for example an LDEV or Port ID.
–st
hh:mm:ss>
Constrains the output by a certain start time.
–et
hh:mm:ss>
Constrains the output by a certain end time.
–tclass The class for the time constraints. Valid arguments are: posted Time is constrained by the
posted time. updated Time is constrained by the updated time. dispatched Time is constrained
by the updated time.
–pf Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
42 Reporting and configuring CLUI shell scripts