HP Unified Extensible Firmware Interface - Manual (Page 6)

Figure 1 HP ProLiant POST screen
3. To navigate through and modify settings in the menu-driven interface, use the keys defined in
the following table.
Action Key
Press to change a selection. Up or down arrow
Press to select an entry. Enter
Press to go back to the previous screen. ESC
Press to view online help about a selected option. F1
Press to load default RBSU configuration settings. You need to reboot
the system for changes to take effect. Press Enter to apply defaults.
Press ESC if you want to cancel. F7
Press to save your changes. F10
POST screen keys
6 Introduction