HP StorageWorks XP Remote Web Console Software User Manual
Page 17
Table 3 Pair Statuses and the Results of the RAID Manager Commands (continued)
RAID Manager Command
Pair Status
pairsplit -E
pairsplit -S
pairresync
-restore
pairresync
pairsplit
paircreate
−split
paircreate
No
Yes
Yes
Yes
NOP
NOP
No
PSUS /
PFUS
No
NOP
No
No
No
No
No
SMPL(PD)
No
No
NOP
NOP
No
No
NOP
COPY(RS)
No
No
NOP
NOP
No
No
NOP
COPY(RS-R)
NOP
Yes
No
Yes*
No
No
No
PSUE
Yes: The command executes the process and ends normally.
NOP: The command does not execute the process, but ends normally.
No: The command ends abnormally (that is, command rejected).
* If you issue the pairresync command to the pair whose status has changed to PSUE because
of the shortage of the shared memory for the V-VOL management area, the command will be
rejected and end abnormally.
When the command executes the process and ends normally, the pair status changes according
to the process. For information about how the pair status changes when the command ends normally,
see
“XP Snapshot Pair Status Transition” (page 15)
and the paragraphs under the figure.
•
The hide mode (-m noread) on the S-VOL is not supported. If you specify the hide mode on
the S-VOL and create a pair, the command will end normally, but the hide mode will be
ignored.
•
When the RAID Manager command ends abnormally (for example, when the RAID Manager
command is rejected), and if the OS of the host computer is HP-UX, SSB (sense byte), which
indicates the cause of the error, will be generated in the RAID Manager error log file. For
more information about the SSBs and the cause of the errors, see
Using XP RAID Manager” (page 103)
Table 4 SSBs and Causes of Error Issued Upon Rejection of RAID Manager Commands
Cause of Error
RAID Manager Command
SSB
An error has occurred during the XP
Snapshot pair operation. For the cause,
check the SSB being output together.
paircreate, pairresync, pairsplit
B901
B9A8
B9A9
B9AD
Because there are no pair tables
available, the XP Snapshot pair cannot
be created.
paircreate
9685
Because of the shortage of the
differential tables, XP Snapshot pair
cannot be created.
paircreate
9686
Because the pool is not available, the
XP Snapshot pair cannot be created.
paircreate
9700
Status of the XP Snapshot Pairs
17