HP ProLiant DL365 G5 Server - Manual (Page 8)

Component identification 8
Front panel LEDs and buttons
Item Description Status
1 Power On/Standby button
and system power LED Green = System is on.
Amber = System is shut down, but power is still applied.
Off = Power cord is not attached, power supply failure has
occurred, no power supplies are installed, facility power is not
available, or disconnected power button cable.
2 UID button/LED Blue = Identification is activated.
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
3 Internal health LED Green = System health is normal.
Amber = System health is degraded. To identify the component in
a degraded state, refer to "HP Systems Insight Display and LEDs".
Red = System health is critical. To identify the component in a
critical state, refer to "HP Systems Insight Display and LEDs".
Off = System health is normal (when in standby mode).
4 External health LED
(power supply) Green = Power supply health is normal.
Amber = Power redundancy failure occurred.
Off = Power supply health is normal when in standby mode.
5 NIC 1 link/activity LED Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. View the LEDs on
the RJ-45 connector for status by referring to the rear panel LEDs
(" Rear panel LEDs and buttons " on page 10 ).