HP ProLiant DL365 G5 Server - Manual (Page 23)

Operations 23
Remove and install a fan module
The server has three fan modules.
To remove a fan module:
1. Power down the server (on page 18 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 19 ).
3. Remove the access panel (on page 20 ).
4. Remove the air baffle (" Remove and install the air baffle " on page 20 ).
5. Remove a fan module.
To install a fan module, reverse the removal procedures.
IMPORTANT: After installing the fan module, firmly press the top of the module connectors to
ensure the connectors are seated properly.