HP ProLiant DL365 G5 Server - Manual (Page 55)

Hardware options installation 55
7. Remove the existing cache module.
8. Install the optional cache module.
9. Install the HP Smart Array P400i Controller (" Installing an integrated HP Smart Array E200i
Controller or an HP Smart Array P400i Controller " on page 50 ).
10. Connect and route the data cables from the HP Smart Array P400i Controller to the hard drive
backplane.
11. Connect the hard drive backplane power cable to the system board.
CAUTION: When routing cables, use the cable trough between fan modules 1 and 2. Be sure
the cables do not interfere with fan module installation. Be sure to route the cables around the
access panel mounting pin bracket so as not to interfere with access panel installation.