HP ProLiant DL365 G5 Server - Manual (Page 21)

Operations 21
4. Remove the air baffle.
To install the component, reverse the removal procedure.
Remove the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Power down the server (on page 18 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 19 ).
3. Remove the access panel (on page 20 ).
4. Remove the air baffle (" Remove and install the air baffle " on page 20 ).
5. Remove the PCI riser board assembly:
a. Disconnect any external cables connected to any existing expansion boards.
b. Loosen the four PCI riser board assembly thumbscrews.