HP ProLiant DL365 G5 Server - Manual (Page 48)

Hardware options installation 48
8. Install the PCI-X riser board on the riser board assembly.
9. Install a PCI-X expansion board (" Installing an expansion board " on page 46 ).
10. Install the PCI riser board assembly (on page 22 ).
11. Install the air baffle (" Remove and install the air baffle " on page 20 ).
12. Install the access panel (on page 20 ).
13. Slide the server into the rack.
14. Power up the server (on page 18 ).
HP Smart Array controller options
The server supports two integrated Smart Array controllers. Upgrade options exist for both integrated
array controllers.
HP Smart
Array E200i
Controller
HP Smart
Array P400i
Controller
PCI
controller PCI controller
and P400i
Channel A drives 1-4 1-4 1-4 1-4 (PCI)
Channel B drives None 5-6* 5-6 5-6 (P400i)
Standard cache 64 MB 256 MB None 256 MB
Standard battery None Yes* None Yes*
Optional cache 128 MB 512 MB None None
Optional battery Yes Yes Yes Yes
*Available in some configurations.
For a list of supported options, see the QuickSpecs on the HP website ( http://www.hp.com/support ).
For instructions on installing optional configurations see the procedures in this guide:
• Upgrading an HP Smart Array E200i Controller cache module and battery pack
• Installing an HP Smart Array P400i Controller cache module and battery pack (on page 54 )