beautypg.com

HP ProLiant SL210t Gen8 Server User Manual

Page 35

background image

Hardware options installation 35

11.

Press and hold the processor retaining bracket in place, and then close each processor locking lever.
Press only in the area indicated on the processor retaining bracket.

CAUTION:

Always use a new heatsink when replacing processors. Failure to use new

components can cause damage to the processor.

12.

Remove the thermal interface protective cover from the heatsink.

CAUTION:

Heatsink retaining screws should be tightened or loosened in diagonally opposite

pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board, connectors,

or screws. Use the wrench supplied with the system to reduce the possibility of overtightening the
screws.

13.

Install the heatsink:

See also other documents in the category HP Computer hardware: