Installing the system software, Registering the server – HP ProLiant SL210t Gen8 Server User Manual
Page 31
Setup 31
3.
During the initial boot:
o
To modify the server configuration ROM default settings, press F9 when prompted from the start up
sequence to enter the RBSU. By default, RBSU runs in the English language.
o
If you do not need to modify the server configuration and are ready to install the system software,
press F10 to access Intelligent Provisioning.
NOTE:
If an HP Smart Array controller has been added or is embedded in the system, the
controller defaults to a RAID configuration based on the size and number of drives installed. For
more information on modifying the controller default settings, see the documentation in the HP
Smart Storage Information Library
For more information on automatic configuration, see the HP ROM-Based Setup Utility User Guide in the HP
RBSU Information Library
Installing the system software
To access and configure Intelligent Provisioning on a single node:
1.
Access Intelligent Provisioning by rebooting the server and pressing F10.
2.
The first time you log into Intelligent Provisioning, follow the steps to set preferences and activate
Intelligent Provisioning.
3.
From the Home screen, click Perform Maintenance, and then click Firmware Update.
4.
Ensure the latest drivers are available for installation. Select Intelligent Provisioning Software from the
list of firmware, and click Update. If the check box is not selected, the latest drivers are already installed.
Registering the server
To experience quicker service and more efficient support, register the product at the HP Product Registration
website