HP ProLiant SL210t Gen8 Server - Manual (Page 25)

Operations 25
b. Connect the two ends to the corresponding connectors on the adapter board.
1U node
2U node
2. In a 1U node configuration:
a. Install the 1U air baffle (on page 28 ).
b. Install the cable guard (" Install the 1U cable guard " on page 19 ).
3. In a 2U node configuration:
a. Install the 2U adapter board bracket (on page 23 ).
b. If a GPU is installed, connect the 2U adapter cable to the GPU power cable.
4. Install the node into the chassis (" Installing a node into the chassis " on page 30 ).
5. Connect all peripheral cables to the node.
6. Power up the node (" Power up the nodes " on page 17 ).