HP ProLiant SL210t Gen8 Server - Manual (Page 24)

Operations 24
4. In a 1U node configuration:
a. Remove the cable guard (" Remove the 1U cable guard " on page 18 ).
b. Remove the 1U air baffle (on page 27 ).
c. Disconnect and remove the Mini-SAS cable.
5. In a 2U node configuration:
a. If a GPU is installed, disconnect the 2U adapter cable from the GPU power cable.
b. Remove the 2U adapter board bracket (on page 22 ).
c. Disconnect and remove the Mini-SAS cable.
Connect the Mini-SAS cable
1. Connect the Mini-SAS cable:
a. Connect the Mini-SAS cable to the SAS connectors on the system board.