HP Deskjet 832c Printer - Manual (Page 12)

4
Setting Up Your Printer with a Parallel Printer Cable 1
Step 3: Plug in the Power
1 Leave the computer and the printer turned off.
2 Lift open the cable access door on the back of the printer.
3 Plug the power adapter’s cord
firmly into the connector on the
back of the printer.
4 Plug the appropriate end of the
power cord into the power
adapter.
5 Plug the other end of the power
cord into an electrical outlet.
Note: If using an HP JetDirect External Print Server with your HP DeskJet
895C Series printer, go to “Setting Up Your Printer on a Network” on page 89.
6410023
Note: Use only the Power button on the front of the printer to turn the
printer on and off. Using a power strip, surge protector or a wall outlet switch
to turn the printer on and off may cause premature failure.
dj895c.book Page 4 Monday, July 12, 1999 11:31 AM