HP ProLiant DL160 Gen8 Server - Manual (Page 60)

Hardware options installation 60
7. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 9 ).
8. Install the TPM security rivet by pressing the rivet firmly into the system board.
9. Install the PCI riser cage (on page 22 ).
10. Install the processor air baffle (on page 20 ).
11. Install the access panel (on page 19 ).
12. Slide the server into the rack.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server (on page 16 ).
Enabling the Trusted Platform Module
1. When prompted during the start-up sequence, access RBSU by pressing the F9 key.
2. From the Main Menu, select Server Security.