HP ProLiant DL160 Gen8 Server - Manual (Page 58)

Hardware options installation 58
Depending on the model purchased, the server may look different than shown.
To install the component:
1. Connect the front video adapter to the front video connector.
CAUTION: Be sure to connect the video adapter to the video connector, and not to the USB
connector.
2. Connect the front video adapter to the video device.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website ( http://www.hp.com/go/productbulletin ).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board.
2. Retaining the recovery key/password (on page 61 ).
3. Enabling the Trusted Platform Module (on page 60 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 79 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
( http://www.microsoft.com ).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
• Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.