beautypg.com

HP ProLiant DL160 Gen8 Server User Manual

Page 44

background image

Hardware options installation 44

b.

Connect the cable from the rear of the drive to the SATA DVD-ROM drive connector on the system

board. Use cable (HP part number 663771-001) to connect to the drive. Connect the blue and
black end of the cable to the optical drive, connect the longer blue end to the SATA connector on the

system board and the short black cable to the power connector.

9.

If you have a LFF configuration, do the following:

a.

Route the cable through the drive bay, and then connect the cable to the rear of the optical drive.