HP ProLiant DL160 Gen8 Server - Manual (Page 37)

Hardware options installation 37
6. Remove the adhesive stickers from the VGA cable clips, and then attach the clips onto the fan cage.
7. Route the cable through the cable clips, and then connect the cable to the VGA card and power supply
cable.
8. Install the processor air baffle (on page 20 ).
9. Install the access panel (on page 19 ).
10. Slide the server into the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server (on page 16 ).