HP XP P9500 Storage - Manual (Page 77)

Cause of error RAID Manager command SSB2
The command ended abnormally because you specified an Auto LUN V2 reserved
volume as the FS or SS P-VOL. All commands 9759
For information o about n using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified a BC/SS P-VOL as the
FS or SS S-VOL. All commands 975A
The command ended abnormally because you specified a BC/SS S-VOL as the
FS or SS S-VOL. All commands 975B
The command ended abnormally because you specified a BC/SS reserved
volume as the FS or SS S-VOL. All commands 975C
The command ended abnormally because you specified an Auto LUN V2 source
volume as the FS or SS S-VOL. All commands 975D
For information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified an Auto LUN V2 target
volume as the FS or SS S-VOL. All commands 975E
For information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified an Auto LUN V2 reserved
volume as the FS or SS S-VOL. All commands 975F
For information about using Auto LUN V2, contact HP Technical Support.
You cannot create the FS or SS pair because you do not have enough shared
memory or the initialization is in process. paircreate 9763
An unavailable parameter (unsupported parameter) is specified in the command. paircreate 976A
You cannot store snapshot data because you ran the command with the PSUE
option. pairsplit 976C
You cannot store snapshot data because the FS or SS P-VOL and Cnt Ac-S S-VOL
share the volume, and the status of the Cnt Ac-S pair is *COPY*. pairsplit 976E
You cannot store snapshot data because the FS or SS P-VOL and Cnt Ac-J S-VOL
share the volume, and the status of the Cnt Ac-J pair is *COPY*. pairsplit 976F
You cannot create the FS or SS pair because you specified Cnt Ac-J delta resync
pair volume as the FS or SS S-VOL. paircreate 9772
You cannot create the FS or SS pair because the FS or SS P-VOL and BC/SS
P-VOL share the volume, and the MU number you specified for the FS or SS pair
is already used by the BC/SS pair. paircreate 9774
You cannot create the FS or SS pair because the FS or SS P-VOL and BC/SS
S-VOL share the volume, and you specified MU number zero (0) for the FS or
SS P-VOL. paircreate 9777
The command ended abnormally because the FS or SS P-VOL and BC/SS P-VOL
share the volume, and the BC/SS pair was in the process of resynchronization. paircreate, pairsplit 977A
The command ended abnormally because the FS or SS P-VOL and BC/SS S-VOL
share the volume, and BC/SS pair status is not PSUS. paircreate, pairsplit 977B
You cannot restore the FS or SS pair because the FS or SS P-VOL and BC/SS
P-VOL share the volume, and BC/SS pair status is not PSUS or PSUE. pairresync -restore 977C
You cannot restore the FS or SS pair because the FS or SS P-VOL and BC/SS
S-VOL share the volume, and BC/SS pair status is not PSUS. pairresync -restore 977D
You cannot store snapshot data because the pool or the pool-VOL is blocked. pairsplit 977E
Troubleshooting with RAID Manager 77