HP XP P9500 Storage - Manual (Page 76)

Cause of error RAID Manager command SSB2
The command ended abnormally because you specified a volume that is in
process of formatting as the FS or SS S-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 973E
The command ended abnormally because you specified a volume that has an
emulation type other than OPEN-V as the FS or SS S-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 973F
You cannot create the FS or SS pair because the volume you specified as the
FS or SS S-VOL has the command device setting. paircreate 9740
You cannot create the FS or SS pair because you specified an external volume
as the FS or SS S-VOL. paircreate 9742
You cannot create the FS or SS pair because you specified a volume other than
V-VOLs as the FS or SS S-VOL. paircreate 9745
You cannot create the FS or SS pair because you specified a pool-VOL as the
FS or SS S-VOL. paircreate 9746
You cannot create the FS or SS pair because you specified a Cnt Ac-S P-VOL as
the FS or SS S-VOL. paircreate 9747
You cannot create the FS or SS pair because you specified Cnt Ac-S S-VOL as
the FS or SS S-VOL. paircreate 9748
You cannot create the FS or SS pair because you specified a Cnt Ac-J data
volume or journal volume in the intermediate site of 3DC cascading configuration
as the FS or SS S-VOL, You cannot create the FS or SS pair. paircreate 9749
You cannot create the FS or SS pair because you specified a Cnt Ac-J P-VOL as
the FS or SS S-VOL. paircreate 974A
You cannot create the FS or SS pair because you specified a Cnt Ac-J S-VOL as
the FS or SS S-VOL. paircreate 974B
You cannot create the FS or SS pair because you specified a Cnt Ac-J journal
volume as the FS or SS S-VOL. paircreate 974C
The command ended abnormally because the volume you specified as the FS
or SS S-VOL has an S-VOL Disable attribute. All commands 974F
You cannot create the FS or SS pair because you specified a volume with the
VMA setting as the FS or SS S-VOL. paircreate 9750
The command ended abnormally because the Max LBA size of the volumes you
specified as the FS or SS P-VOL and S-VOL is different. paircreate, pairsplit,
pairresync, pairresync
-restore 9752
The command ended abnormally because the number of slots of the volumes
you specified as the FS or SS P-VOL and S-VOL is different. paircreate, pairsplit,
pairresync, pairresync
-restore 9753
You cannot create the FS or SS pair because you specified a THP V-VOL as the
FS or SS S-VOL. paircreate 9754
The command ended abnormally because you specified a BC/SS reserved
volume as the FS or SS P-VOL. All commands 9756
The command ended abnormally because you specified an Auto LUN V2 source
volume as the FS or SS P-VOL. All commands 9757
For information about using Auto LUN V2, contact HP Technical Support.
The command ended abnormally because you specified an Auto LUN V2 target
volume as the FS or SS P-VOL. All commands 9758
For information about using Auto LUN V2, contact HP Technical Support.
76 RAID Manager command reference