HP XP P9500 Storage - Manual (Page 23)

FS status Cnt Ac-S/Cnt Ac-J task
PSUE RCPY PSUS, PFUS PAIR, PFUL COPY
N/A: Not applicable
The following table shows the Cnt Ac-S/Cnt Ac-J tasks you can perform when the FS P-VOL is
shared with a Cnt Ac-S/Cnt Ac-J S-VOL.
FS status Cnt Ac-S/Cnt Ac-J task
PSUE RCPY PSUS, PFUS PAIR, PFUL COPY
No No No No No Create pair
Yes N/A Yes Yes Yes Split pair
Yes N/A Yes Yes Yes Resynchronize pair
Yes N/A Yes Yes Yes Delete pair
Yes N/A Yes Yes Yes Switch to remote site
*To use a Cnt Ac-S/Cnt Ac-J S-VOL as a FS P-VOL, create a pair after creating the Cnt Ac-S/Cnt Ac-J pair.
For more information about Cnt Ac-S tasks and pair status, see the HP XP P900 Continuous Access Synchronous User
Guide.
For more information about Cnt Ac-J tasks and pair status, see the HP XP P900 Continuous Access Journal User Guide.
Legend
Yes: You can perform the task
No: You cannot perform the task (the command is rejected)
N/A: Not applicable
Using Fast Snap in a 3DC multi-target configuration
The following figure shows a pair configuration where you use FS in a 3DC multi-target configuration
for Cnt Ac-S and Cnt Ac-J.
NOTE: You cannot share 3 DC volumes that use two mirrors with FS.
Interoperability with other software applications 23