HP Color LaserJet Enterprise Multifunction M680 Printer series - Manual (Page 38)

3. Insert the new staple cartridge into the stapler
and push down on the green handle until it snaps
into place.
4. Close the stapler cover.
Configure the default staple location
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
● Stapler/Stacker Settings
● Stapling
3. Select a staple location from the list of options, and then touch the Save button. The following options
are available:
● None : No staples
● Top left or right : If the document has portrait orientation, the staple is in the top left corner of the
short edge of the paper. If the document has landscape orientation, the staple is in the top right
corner of the long edge of the paper.
26 Chapter 2 Paper trays ENWW