HP XP Performance Advisor Software - Manual (Page 27)

4. Select the required host and enter the c command.
The Port menu showing all ports connected to the hosts is displayed.
Pick LDEVs/RAID Groups selection scheme
Most arrays include a large number of LDEVs and RAID Groups. The Pick LDEVs/RAID Groups Selection
Scheme enables you to sort LDEVs and RAID Groups according to your requirements. This menu
supports the following options:
• Filter LDEVs by RAID Groups
• Filter RAID Groups by LDEVs
• Manually add RAID Groups and LDEVs without Filtering
• Skip and start collecting
Figure 17 shows the Pick LDEVs/RAID Groups selection scheme.
Figure 17 Pick LDEVs/RAID Groups selection scheme
.
Viewing Pick LDEVs/RAID Groups selection scheme
To view this screen, perform the following steps:
1. Start XPWatch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key.
3. The Available Host Groups screen displaying the list of host groups connected to the array gets
displayed.
4. Select the required host and enter the c command. The Port menu showing all ports connected
to the hosts is displayed.
5. Select the required port and enter the c command. The Pick LDEVs/RAID Groups Selection Scheme
screen appears.
RAID Group menu
The RAID Group menu lists the details of all RAID Groups connected to the selected Host(s).
Figure 18 shows the RAID Group menu.
XPWatch and XPSketch Reference Guide 27