HP Storage Mirroring V5 Software - Manual (Page 39)

9 - 2
Route
By default, Server Image Copy will select the default route for transmissions. If desired, select a
different IP address on the target that will be used to receive Server Image Copy transmissions.
E-mail notification
E-mail notification sends specific Server Image Copy events to user-defined e-mail addresses. If you
want to use e-mail notification. you will need to identify who will receive the messages, what
messages they will receive, and your e-mail server configuration.

Recipients—Specify the e-mail address that each Server Image Copy e-mail message should be
sent to and click Add New. The e-mail address will be inserted into the list of addresses. Each
address is limited to 256 characters, and you can add up to 256 e-mail addresses. If you want to
remove an address from the list, highlight the address and click Remove. If you want to remove
all of the addresses from the list, click Clear.

Notifications—Specify which events that you want to be sent via e-mail. You can select Error,
Warning, and/or Information.