HP Storage Mirroring V5 Software - Manual (Page 31)

7 - 7

DNS Servers—Click Add and specify the IP address of a DNS server in the DNS domain.
Repeat this for each DNS server in the DNS domain. If you want to remove a server, highlight
the address and click Remove.

IP addresses—For each IP address on the source, select an IP address on the recovery server
that will take over for that source IP address.
Once you have your DNS updates configured, click Test DNS to determine if your DNS updates
will be successful.
12. Click Next to continue.
13. Specify your recovery shutdown options.

Pause recovery—Specify if you want to pause the recovery process after the original source
image has been mirrored to the recovery server, which allows you time to coordinate any
other tasks. If you do not pause the recovery, the original source system state will be
processed on the recovery server immediately after the mirror is complete. (The recovery
server will automatically reboot after the system state processing is completed.)

Shutdown Source Server—Specify if you want to shutdown the source server before the
original source system state is processed on the recovery server, which avoids identity
conflicts on the network. The shutdown will occur after the original source image is mirrored
to the recovery server but before the original source system state is applied to the recovery
server. This option is not available if the recovery server is the original source.

Original Protection Job—Specify what to do with the original protection job.

Delete the original protection job—The original protection job is stopped and then
deleted.

Stop the original protection job—The original protection job is stopped but is not
deleted.

Leave the original protection job running—The original protection job is not stopped
or deleted.
If the source is not running, these options will be discarded because they cannot be
performed. This option is not available if the recovery server is the original source or the
image server.
14. Click Next to continue.
15. At this point, Server Image Copy validates that your recovery server is compatible to become
your original source. Errors are designated by a red circle with a white X. (A question mark icon
is an unknown error.) Warnings are designated by a yellow triangle with a black exclamation
point. A successful validation is designated by a green circle with a white checkmark.