HP Storage Mirroring V5 Software - Manual (Page 32)

7 - 8
You must correct any errors before you can enable protection. Double-click on any of the
validation items to see details. Depending on the error, you may be able to click Fix or Fix All
and let Server Image Copy correct the problem for you. For those errors that Server Image Copy
cannot correct automatically, you will need to modify the recovery server to correct the error, or
you can select a different server. You must revalidate the selected server until the validation
check passes without errors. Once the validation is successful, click Next to continue.
16. At the Recovery summary page, you can review the choices you have made and you can also
set optional data transmission and e-mail notification settings. If you need to make any changes
to the selections you made, click Back to return to the previous pages. If you want to configure
optional settings, click Configure. See Configuring Advanced Settings on page 9-1 for
details on the data transmission and e-mail notification settings. Once you have completed your
configuration, click Finish to start the recovery.
17. Monitor the progress of the recovery mirror on the Monitor page. See Monitoring Jobs on
page 6-1 for details.
18. When the recovery mirror has completed, the recovery server will automatically reboot to
complete the recovery process. If you specified to pause the recovery before applying the
system state, when the mirror is complete, the Activity will change to Protected. Use this time
to complete any necessary tasks. When you are ready to complete the recovery, click Resume
on the Monitor page toolbar (the green triangle) to complete the recovery process.
Once the recovery server has been rebooted, it will become the original source server.
NOTE: Because the Windows product activation is dependent on hardware, you may need to
reactivate your Windows registration after recovery. Follow the on-screen prompts to
complete the reactivation.