HP 3PAR Application Software Suite for VMware - Manual (Page 12)

RMVMware Createrc command
The RMVMware createrc command creates a remote Recovery Set.
NOTE: When using the RMVMware createrc command, you must use the identical name of
the storage system registered in the HP 3PAR StoreServ Storage system credential database.
The syntax for the RMVMware createrc command:
RMVMware Createrc <-rcgroup "RemoteCopyGroup"> [-consistency ] <[-vcserver
"vCenterServerName" [-vcuid "vCenterServerUserID"] [-vcpwd "v
CenterServerPassword"] | [-vcfile "VMwareCredentialStoreFileLocation"] ]> <-remotehost
"RemoteHostName"> <[-inserv "InServName"] [-inservuid "InServUs
erID"]> [-inservpwd "InServPassword"] <[-remoteinserv "InServName"] [-remoteinservuid
"InServUserID"]> [-remoteinservpwd "InServPassword"] [-expiry "V
irtualCopyExpiryInHour"] [-retention "VirtualCopyRetentionInHour"]
DESCRIPTION:
Create HP 3PAR Recovery Sets based on Remote Copy groups.
OPTIONS:
-rcgroup: Remote Copy group name for which the HP 3PAR remote Recovery Set will
be created (this parameter is case sensitive)
-vcserver: VMware vCenter Server name or IP address
-vcuid: VMware vCenter Server log in user name
-vcpwd: VMware vCenter Server user password, optional when -vcfile is specified
-vcfile: Optional VMware credential store file location
-remotehost: remote host where Recovery Manager for VMware vSphere is installed
to take remote snapshot on.
-inserv: local HP 3PAR Storage System name
-inservuid: local HP 3PAR Storage System user name, required when registered
-inservpwd: local HP 3PAR Storage System password, optional if -inserv is
registered
-remoteinserv: remote HP 3PAR Storage System name
-remoteinservuid: remote HP 3PAR Storage System user name, required when
registered
-remoteinservpwd: remote HP 3PAR Storage System password, optional if
-remoteinserv is registered
-consistency: Optional to set Virtual Machine application consistency to yes or
no.
-expiry: Optional to set HP 3PAR Recovery Set expiration in hours (1-43800).
-retention: Optional to set HP 3PAR Recovery Set retention in hours (1-43800).
EXAMPLE:
The following command will create HP 3PAR Recovery Set for the Remote Copy group
RMV_RCGROUP_ASYNC:
C:\> RMVMware createrc -rcgroup RMV_RCGROUP_ASYNC -vcserver caracal -vcuid
administrator -vcpwd ssmssm -remotehost 10.112.61.225 -inserv s25
6 -inservuid root -remoteinserv s336 -remoteinservuid root -consistency yes
The following options and arguments used for this command:
•
-rcgroup
Remote Copy group name for which the HP 3PAR remote Recovery Set will be created (this
parameter is case sensitive).
•
-vcserver
VMware vCenter Server name or IP address.
•
-vcuid
VMware vCenter Server log in user name.
12 Overview