HP 3PAR Recovery Manager Software - Manual (Page 72)

Result with Description
•
Multiple {RMHirtualMachineInfo} objects:
Multiple RMHirtualMachineInfo objects (one per VM).
Success Paths
•
Scenario 1: Virtual Machine(s) is fetched.
At least one Virtual Machine is returned.
•
Scenario 2: Virtual Machine(s) is not fetched.
No Virtual Machines are available. Nothing is returned.
Failure Paths
•
Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
•
Scenario 2: Unable to fetch Hyper-V.
A Hyper-V is required to fetch VMs.
Login-Rmh
Log into RMH Server using Windows RMH account.
The optional login-Rmh enables the user to log on to Recovery Manager for Hyper-V. After a
successful login is established, the user is not required to enter additional credentials for subsequent
Cmdlets.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Login-Rmh-RmhServerName <-RmhServerName>-RmhUserName
<-RmhUserName>-RmhPassword <-RmhPassword>[-RmhEncrytedPassword]
Table 44 Login-Rmh parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
RMH user name. If not specified, a
dialog box will be presented to enter
credentials. Required -RmhUserName
RMH user password. If not specified, a
dialog box will be presented to enter
credentials. Required -RmhPassword
May be used instead of
-RmhPassword
.
Optional -RmhEncrytedPassword
72 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands