HP 3PAR Recovery Manager Software - Manual (Page 47)

Table 22 Set-RmhPolicy parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V Required -HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Name/unique id of VM to set policy
for Virtual Machine. Required -VmNameUuid
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset. Optional -Expiry
Integer value followed by letter h or d
for Hours and Days respectively. Use 0
to reset Optional -Retention
Disabled or enabled. Use reset to
reset. Optional -SavedStateBackups
Displays progress messages Optional -Verbose
Get-ClusterNodeNames
The Get-ClusterNodeNames command retrieves cluster node names for the Hyper-V cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-ClusterNodeNames -RmhServerName -HypervName
[-Verbose]
Table 23 Get-ClusterNodeNames parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V Required -HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages. Optional -Verbose
Get-EncryptedLoginCredentials
Get-EncryptedLoginCredentials is used for scripting to return an encrypted password for
the currently logged-in RMH user.
Configuring RMH Server 47