HP 3PAR Recovery Manager Software - Manual (Page 53)

Table 30 Mount-vCopy parameters (continued)
Description Optional/Required Parameter
Hyper-V user name. If not specified,
HypervUsername
is used from
Login-Rmh .
Optional -HypervPassword
Displays progress messages. Optional -Verbose
The command returns RmhMountVirtualCopySetResult objects and contains:
•
RmhMountVirtualCopySet with current state updated
•
Information on name, WWN, partition, volume guid path, and mount point of each Virtual
Volume mounted
Restore-vCopyVm
The restore-vCopyVm initiates a full restore or recovery of Virtual Machines.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Restore-vCopyVm -RmhServerName [-HypervName] -VcNameUuid
-VmNameUuid [-Timestamp] [-Force] [-RestartVm]
[-Verbose]
Table 31 Restore-vCopyVm parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V Optional -HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Select VC by name/uuid. Required -VcNameUuid
Select name/uuid to filter VC selection
by VM. Required -VmNameUuid
Specify timestamp of VC to locate in
the format mmddyyhhmmss. Optional -Timestamp
Bypass confirmation prompt. Optional -Force
If specified, VM will be restarted. Optional -RestartVm
Displays progress messages. Optional -Verbose
This command returns the location of restored Virtual Machine and host name.
Working with Virtual Copies 53