HP 3PAR Recovery Manager Software - Manual (Page 71)

Result with Description
•
Multiple {RMHirtualCopySet} objects:
Multiple RMHirtualCopySet objects (one per VM).
Success Paths
•
Scenario 1: Virtual Copy is fetched.
At least one Virtual Copy meeting the criteria is returned.
•
Scenario 2: Virtual Copy is not fetched.
No Virtual Copies meeting the criteria are specified. Nothing is returned.
Failure Paths
•
Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
•
Scenario 2: Storage System session credentials are not provided.
Storage System session credentials are not provided for this command.
Get-VirtualMachine
Get-VirtualMachine retrieves current Virtual Machines available on an active-session Hyper-V
host/cluster.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-VirtualMachine -RmhServerName -HypervName
[-Verbose]
Table 43 Get-VirtualMachine parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V Required -HypervName
host/cluster must be selected using
Select-Hyperv
. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages. Optional -Verbose
Get-VirtualMachine 71