HP ProLiant ML370 G6 Server - Manual (Page 70)

Hardware options installation 70
4. Remove fan 5 (on page 26 ).
5. If installed, remove the BBWC battery pack or the FBWC capacitor pack (on page 27 ).
6. Remove the air baffle (on page 28 ).
7. Remove the fan cage (on page 29 ).
8. Remove all SFF drives and the drive cage from bay 3, if installed.
For more information, see the server maintenance and service guide.
9. Remove the media bay blank (on page 30 ).
10. Remove the DVD-ROM drive (on page 31 ).
11. Install the two-bay LFF drive cage.
12. Using a T-15 Torx screwdriver, install the locking brackets.