HP ProLiant ML370 G6 Server - Manual (Page 68)

Hardware options installation 68
7. Remove the fan cage (on page 29 ).
8. Remove the hard drive cage blank (on page 31 ).
9. Using a T-15 Torx screwdriver, install the six-bay LFF backplane.
10. Connect the power cable.
The cabling for drive cage bay 1 is not shown for clarity.
11. Connect the SAS cables to an optional SAS controller (" Storage controller option " on page 84 ) or to an
optional SAS expander (" HP SAS Expander Card option " on page 87 ).