HP OmniBook 3100 Notebook PC - Manual (Page 38)

38
1. From the Start menu, shut down the OmniBook.
If you have a plug-and-play operating system, such as Windows 95, you do not
need to turn off the OmniBook before inserting it into the dock.
Caution
Use only the HP F1454A ac adapter (shipped with OmniBooks compatible with
this dock) . Using any other ac adapter could damage the OmniBook and may
void your warranty. Refer to the warranty statement for your product.
2. Plug the power cord into the ac adapter, then into an ac outlet. Plug the ac
adapter into the dock.
3. On the rear of the OmniBook, slide the docking door to the left.
4. Place the OmniBook on the dock platform, with the rear of the computer facing
the dock's docking connector.
5. Position your fingers on the platform grips as shown below. Use your thumbs to
push the computer into the dock until the computer slides into place.