HP OmniBook 3100 Notebook PC User Manual
Page 33

33
If you are connecting a serial mouse, you need to select Standard Serial Mouse in
Control Panel, Mouse, General, Change.
To connect an external PS/2 keyboard or a PS/2 mouse
1. From the Start menu, shut down the OmniBook.
2. Plug the mouse or keyboard PS/2 cable into the PS/2 port on the OmniBook.
•
To connect both a mouse and a keyboard, use the HP F1469A PS/2 Y-
adapter.
•
To connect a device that has a PC-type jack, first connect its cable to an
adapter cable with a PS/2 jack.
3. Press the blue power button to turn on the OmniBook.
Hint
To use hot keys from an external keyboard, substitute CTRL+ALT for the OmniBook
Fn key. For example, to access Fn+F2, press CTRL+ALT+F2. If this does not work,
check that the setting for External Fn Key is enabled in the System Devices menu of
the
BIOS Setup utility.
To connect a USB device