HP OmniBook 3100 Notebook PC - Manual (Page 11)

11
2. Operating the OmniBook
• Powering the OmniBook.
• Starting and Stopping the OmniBook.
• Using the Touch Pad.
• Using the OmniBook Display.
• Adjusting the Sound System.
• Using the OmniBook Keyboard.
• Checking the Status of the OmniBook.
• Protecting the OmniBook.
Powering the OmniBook
To connect ac power
There are two ways to power the OmniBook: by ac adapter and by battery.
Caution
Use only the HP ac adapter intended for this product, model F1454A. Using
any other ac adapter could damage the OmniBook and may void your
warranty. Refer to the warranty statement for your product.
1. Connect the power cord to the ac adapter, then plug the cord into an ac outlet.
The light on the ac adapter shines when the adapter is powered.
2. Connect the ac adapter to the OmniBook’s left side, as shown.
3. Press the blue power button to turn on the OmniBook.
When the OmniBook is plugged into ac power and a battery is installed, it