HP StorageWorks XP Remote Web Console Software User Manual
Page 218
6-20
Chapter 6 Configuring Journal Groups
Hitachi Universal Replicator for IBM /OS User’s Guide
–
Entire: Whole data in primary data volume will be copied to secondary
data volume when delta resync operation cannot be performed. The
default is Entire.
–
None: No processing will take place when delta resync operation
cannot be performed. Therefore, the secondary data volume will not be
updated.
Caution: This option cannot be specified in the secondary site.
•
Timer Type: Allows you to specify the type of clock used for consistency
time.
–
System: The system clock of the mainframe host is used.
–
Local: The system clock is not used.
–
None: The system clock of the mainframe host is used. The difference
between System and None is explained in section Timer Type Option.
Notes
:
–
Ensure that the same timer type is specified in both the primary and the
secondary sites.
–
If At-Time Split function is used when URz and SIz are used in
conjunction, the Timer Type cannot be changed.
–
You can only specify None if the journal group belongs to an extended
consistency group.
•
Set: Applies the settings in the window to the Journal Operation window
(Figure 4-1).
•
Cancel: Cancels the settings.