HP StorageWorks XP Remote Web Console Software - Manual (Page 178)

5-8 Chapter 5 Configuring Storage Systems and Logical Paths
Hitachi Universal Replicator for IBM /OS User’s Guide
Configuring Storage System Options
The Optional Operations window allows you to change storage system option
settings
To change the option settings of the storage system:
1. Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to Storage
Navigator User's Guide.
2. Ensure that the Optional Operation window is displayed.
3. Select Subsystem in the tree.
The list displays storage system options (see Figure 5-1).
4. Do either of the following:
– Right-click Subsystem in the tree, and then select Change System
Option from the pop-up menu.
– Right-click information in the list to display the pop-up menu, and select
Change System Option from the pop-up menu.
5. In the System Option window (Figure 5-2), change storage system options.
6. Select the Set button.
7. See the Preview list to verify the changes that you have made.
– If you want to modify a change, right-click the change and then select
Modify. A window appears and allows you to modify the change.
– If you want to cancel a change, right-click the change and then select
Cancel.
8. Select Apply to apply the changes.
Note: If an error occurs, the rightmost column of the Preview list displays
the error code. To view detailed information about the error, right-click the
error code and then select Error Detail. An error message appears and
gives you detailed information about the error.
Figure 5-1 Storage System Option Settings in the Optional
Operation Window