HP StorageWorks XP Remote Web Console Software User Manual
Page 189
Chapter 5 Configuring Storage Systems and Logical Paths
5-19
Hitachi Universal Replicator for IBM /OS User’s Guide
Communication Time
Out
This status indicates one of the following:
•
A timeout error has occurred between the primary and the secondary storage
systems.
• A logic error is detected between the primary and the secondary storage systems.
Resource Shortage
(Port)
The local storage system rejected the function for configuring logical path connection. All
logical path resources in the local storage system might be used for other connections.
Resource Shortage
(Pair-Port)
The remote storage system rejected the function for configuring logical path connection. All
logical path resources in the remote storage system might be used for other connections.
Serial Number
Mismatch
The serial number of the storage system connected to this logical path does not match the
serial number specified by the Add DKC window.
Invalid Port
The port is not an initiator port.
Pair-Port Number
Mismatch
This status indicates one of the following:
•
The specified port number is incorrect.
•
The port in the remote storage system is physically disconnected from the local
storage system.
Pair-Port Type
Mismatch
The port on the remote storage system is not an RCU target port.
Communication Failed A communication timeout error has occurred on the path between the primary and the
secondary storage systems.