HP StorageWorks XP Remote Web Console Software - Manual (Page 150)

4-16 Chapter 4 Using the Universal Replicator for z/OS GUI
Hitachi Universal Replicator for IBM /OS User’s Guide
– Controller ID displays the controller ID and the model name of the
storage system of a remote storage system. The controller ID is a
storage system family ID of a storage system. The icon indicates the
status of logical paths between the local storage system and the remote
storage system:
All the logical paths are in normal status.
A failure occurs to some of the logical paths.
Note: The controller ID for a USP V storage system is 5.
– S/N(LDKC) displays the five-digit serial number and the LDKC number
of the remote storage system. “00” is displayed for the LDKC number
when the remote storage system is TagmaStore USP/NSC.
– Path Gr. ID displays the path group ID. All the path group IDs are
displayed as Default.
– M-R Path indicates the channel type of the logical paths between the
local storage system and the remote storage system. This column
always displays Fibre.
– Status indicates whether logical paths fail.
Normal No failure occurs to the logical paths
Failed All the logical paths fail.
Warning Some of the logical paths fail.
– Num of Path indicates the number of logical paths.