Remote makefile project wizard – HP Integrity NonStop H-Series User Manual
Page 81
Figure 37 Remote Makefile Project wizard
2.
Enter a project name in the Project name: field.
3.
Select the remote NonStop system that will host the project using the Build system: combo
box. (To add systems to the combo box, select Edit... to open Network Connection preferences.)
4.
In the Platform: row, select OSS if your project will build using OSS tools, or Guardian if your
project will build using Guardian tools.
5.
Enter the file system location of the project in the Project location: field (or select Browse... to
browse for the location).
6.
If the Connect to Build System... button is enabled, select it now to establish a connection to
the remote NonStop system you specified in step 3.
7.
Under Referenced remote makefile projects:, select any remote projects that should build before
this project does.
8.
Select Next > to continue to the Build Settings page.
shows the Build
Settings page as it appears if you selected the Guardian platform in step 4.
Creating projects
81