HP Integrity NonStop H-Series User Manual
Page 78
Figure 34 Initial Build Settings page (makefile project)
7.
Depending on your tool chain selections, you will see a TNS/E tools root:row, a TNS/R tools
root: row, or both. Select the root directories of the RVUs to be used to build your project for
TNS/E and TNS/R. If a tools root combo box is empty, select the Configure locations... link
to establish where cross compilers and tools are located on your system. (These settings are
used to determine where the C/C++ indexer looks for system headers and, optionally, to set
COMP_ROOT
.)
8.
In the Cygwin/Msys bin: row, select a bin directory for Cygwin or Msys if you want NSDEE
to prepend the bin path to PATH prior to builds. Leave the setting blank if you added Cygwin
or Msys bin to PATH yourself and NSDEE inherits the PATH setting. If no Cygwin or Msys
bin
is available in the Cygwin/Msys bin: combo box, select the Configure locations... link to
establish the location of Cygwin or Msys.
9.
Deselect the Set COMP_ROOT environment variable to tools root above check box if you do
not want NSDEE to set COMP_ROOT (useful if your makefile already sets it).
10.
Select Next > to continue to the Select Configurations page (
). This page
shows the build configurations that will be created by default (one per tool chain for makefile
projects). You can deselect any build configurations you don't want included in your project.
This page is provided by CDT. See the C/C++ Development User Guide for more information.
78
Tasks